suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Front Differential|Page 666 > < Fluid - Differential|Capacity Specifications|Page 663
Page 1
background image

Fluid - Differential: Service and Repair
Front Differential

Gear Oil Inspection and Change 

NOTE:  
^

Hypoid gear oil must be used for differential.

^

It is highly recommended to use SAE 80W-90 viscosity.

1) Before oil change or inspection, be sure to stop engine and lift up vehicle horizontally.
2) Check oil level and existence of leakage. If leakage is found, correct its cause.

3) Drain old oil and pour proper amount of gear oil as specified below (roughly up to level hole).

4) Apply sealant to thread of drain plug and torque plugs to specification.

Gear oil capacity: 1.0 L (2.1/1.8 US/Imp. pt) 

Front Differential|Page 666 > < Fluid - Differential|Capacity Specifications|Page 663