Grand Vitara 4WD V6-2.5L (2003)
Remove old fuel hose and clamps and replace it with new Fuel Hose (8) and Fuel Hose Clamps (7) as shown in picture.
NOTE:
Be sure the clear protective cover on Fuel Hose (8) is mounted towards the fuel filter.
Carefully raise the tank back up and secure it with the four bolts. Reinstall fuel tank shield. Bolt tighten torque 50 Nm (5.0 kg-m, 36.5 lb-ft).
6)
Leak check and apply "ER" sticker. Lower the vehicle and pressurize the fuel system. This can be done by turning the ignition key on for three
seconds and off for three seconds several times. Check for leaks. Then start the engine to purge any remaining air in the fuel system. Be sure to
write the dealer number on the blue ER" sticker and affix to radiator core support as shown. Recall complete.
