Grand Vitara 4WD V6-2.5L (2003)
Installation
Reference: Front Wheel Speed Sensor Inspection: Type 1
1) Check sensor rotor referring to Front Wheel Speed Sensor Rotor On-Vehicle Inspection: Type 1.
2) Install it by reversing removal procedure.
CAUTION:
^
Do not pull wire harness or twist more than necessary when installing front wheel speed sensor (1).
^
Fit harness grommet to inner fender securely.
Tightening torque
Front wheel speed sensor harness clamp bolt a: 10 Nm (1.0 kg-m, 7.5 ft. lbs.)
Front wheel speed sensor bolt b: 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
3) Check that there is no clearance between sensor (1) and knuckle.
Rear
Rear Wheel Speed Sensor Removal and Installation
Removal
Reference: Rear Wheel Speed Sensor Output Voltage Inspection: Type 1
