Grand Vitara 4WD V6-2.5L (2003)
4. Connect parking brake cable hanger (1) to chassis frame (4) and clamp (3) to crossmember (2). Remove floor jack from axle housing.
5. Install wheel and tighten wheel nuts to specified torque.
Tightening torque
Wheel nut (a): 100 Nm (10.0 kg-m, 72.5 ft. lbs.)
6. Lower hoist and tighten absorber lower nut to specified torque.
NOTE: Tighten lower nut with vehicle off hoist and in non-loaded condition.
Tightening torque
Shock absorber lower nut (b): 100 Nm (10.0 kg-m, 72.5 ft. lbs.)
