Grand Vitara 4WD V6-2.5L (2003)
11. Remove hub bolts from hub.
Wheel Hub/Bearing Oil Seal Installation
1. Insert new stud in hub hole. Rotate stud slowly to assure serrations are aligned with those made by original bolt.
2. Install new sensor rotor by using special tools (if equipped with ABS).
NOTE: Use care not to insert wheel hub diagonally.
Special tool
(D): 09952-86510
(E): 09924-74510
Wheel speed sensor rotor installing position (reference dimension "a")
"a": 4.9 ± 0.1 mm (0.19 ± 0.004 inch)
3. Install wheel hub component to spindle supporting wheel bearing inner race by finger as shown in the figure.
CAUTION: Don't tap wheel hub component by hammer or the like. Otherwise, it will be broken.
