Grand Vitara 4WD V6-2.5L (2003)
5. Install new molding (1) to glass (2).
6. Clean glass surface to be adhered to body with clean cloth. If cleaning solvent is used, let it dry for more than 10 minutes.
Cleaning area for windshield (distance from the edge of glass or molding)
"a": 30 - 50 mm (1.18 - 1.97 in.)
7. Using new brush, apply sufficient amount of primer for glass along glass surface to be adhered to body.
NOTE:
-
Be sure to refer to maker's instruction for proper handling and drying time.
-
Do not apply primer on outside of ceramic coated surface.
-
Do not touch primer coated surface.
Area applied primer for windshield
Width "b": 18 - 19 mm (0.71 - 0.75 in.)
Width "c": 16 - 17 mm (0.63 - 0.67 in.)
