suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Disabling Air Bag System|Page 6530 > < Disabling Air Bag System|Page 6528
Page 4
background image

8. Install "A/B" fuse to fuse box.
9. Connect negative (-) cable at battery.

10. Turn ignition switch to ON position and verify that "AIR BAG" warning light flashes 6 times and then turns OFF. If it does not operate as

described, perform Air Bag Diagnostic System Check:Advanced Air Bag.

Except Advanced Airbag

Enabling Air Bag System

1. Confirm that battery negative (-) cable is disconnected.
2. Turn ignition switch to "LOCK" position and remove key.
3. Connect yellow connector (1) of contact coil and combination switch assembly by pushing connector till click is heard from it.

Disabling Air Bag System|Page 6530 > < Disabling Air Bag System|Page 6528