Grand Vitara 4WD V6-3.2L (2010)
Rear Brake Caliper Disassembly and Assembly
Rear Brake Caliper Disassembly and Assembly
Reference: Rear Brake Caliper Removal and Installation
Disassembly
NOTE: Before disassembly, clean all around caliper with brake fluid.
1) Remove disc brake piston with air blown into flexible hose joint bolt installation hole.
WARNING: Do not apply too highly compressed air which will cause piston to jump out of cylinder. Place a cloth (1) to prevent piston
from damage, it should be taken out gradually with moderately compressed air. Do not place your fingers in front of piston when using
compressed air.
