Grand Vitara 4WD V6-3.2L (2010)
Brake Master Cylinder: Service and Repair
Master Cylinder Assembly Removal and Installation
Master Cylinder Assembly Removal and Installation
CAUTION:
^
Never disassemble master cylinder. Disassembly will spoil its original function. If faulty condition is found, replace it with new one as an
assembly.
^
Do not allow brake fluid to get on painted surfaces. Painted surfaces will be damaged by brake fluid, flush it with water immediately if
any fluid is spilled.
Removal
1) Disconnect reservoir lead wire at coupler (1).
2) Clean outside of master cylinder and take out fluid with syringe or such.
3) Disconnect clutch reservoir hose (1) from reservoir (2) (M/T model).