Grand Vitara 4WD V6-3.2L (2010)
Drive Belt Tensioner: Service and Repair
Tensioner and Idler Pulley Removal and Installation
Removal
1. Remove accessory drive belt.
2. Remove tensioner (1) and idler pulley(s) (2).
Installation
-
Tighten tensioner bolts and idler pulley bolts to specified torques.
Tightening torque
Tensioner bolt (a): 25 N.m (2.5 kg-m, 18.5 lbf-ft)
Idler pulley bolt (b): 55 N.m (5.6 kg-m, 40.5 lbf-ft)
-
For N32A, tighten timing chain cover bolts to 20 N.m (2.0 kgf-m, 15.0 lbf-ft), and retighten them to 60 N.m (6.1 kgf-m, 44.5 lbf-ft).
Tightening torque
Timing chain cover bolt * (c): 20 N.m -> 60 N.m (2.0 kgf-m -> 6.1 kgf-m, 15.0 lbf-ft -> 44.5 lbf-ft)