Grand Vitara 4WD V6-3.2L (2010)
Installing wheels without good metal-to-metal contact at mounting surfaces can cause wheel nuts to loosen, which can later allow wheel to come
off while vehicle is moving.
^
Use the designated tire and wheel with tire pressure sensor for the vehicle with TPMS control module. In case of using any undesignated tire and
wheel without tire pressure sensor, TPMS control module flashes ON and OFF the low tire pressure warning light.
^
In case of using the designated tire and wheel with tire pressure sensor, register its tire pressure sensor code with TPMS control module after its
installation on the vehicle.
Tightening order
"A" - "B" - "C" - "D" - "E"
Tightening torque
Wheel nut (a): 100 Nm (10.0 kg-m, 72.5 lbf-ft)
Front Suspension
Front Wheel Hub Assembly and Steering Knuckle Components
CAUTION:
Never disassemble front wheel hub assembly. Disassembly will spoil its original function. If faulty condition is found, replace it with new one.
