Grand Vitara 4WD V6-3.2L (2010)
Transmission Position Switch/Sensor: Adjustments
Transmission Range Sensor Inspection and Adjustment
1) Shift manual select lever to "N" range.
2) Check that center line (2) on manual shift and "N" reference line (1) on sensor are aligned. If not, loosen sensor bolt (3) and align them.
3) Check that engine starts in "N" and "P" ranges but it doesn't start in "D", "3" "2", "L" or "R" range. Also, check that back-up light lights in "R"
range.
If faulty condition cannot be corrected by adjustment, disconnect transmission range sensor connector and check that continuity exists as shown by
moving select lever.