Grand Vitara 4WD V6-3.2L (2010)
Fuel Gauge Sender: Service and Repair
Main Fuel Level Gauge Removal and Installation
Main Fuel Level Gauge Removal and Installation
WARNING: When performing the following procedure, be sure to observe Precautions on Fuel System Service:N32A in order to reduce the
risk or fire and personal injury.
CAUTION:
-
Do not touch resister plate (1) and deform arm (2). It may cause main fuel level gauge to fail.
-
Be very careful not to cause damage to fuel tube installed section (sealed section in bore). If it be damaged, replace it with new one, or fuel
will leak from the part.
Removal
1. Remove fuel pump assembly from fuel tank.
2. Disconnect main fuel level gauge connector.
3. With pressing snap-fit part (2), remove main fuel level gauge (1) by sliding it in the arrow direction as shown in figure.