Grand Vitara 4WD V6-3.2L (2010)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor Removal and Installation
NOTE: For identification of each cylinder and bank, refer to Precaution for Identification of Cylinder and Bank:N32A.
Removal
1. Disconnect negative cable from battery.
2. Remove exhaust manifold.
3. Remove bank-1 side engine mounting and bracket.
4. Disconnect connector (2) from CKP sensor (1) as follows.
a. Pull out lock lever (3) in arrow direction.
b. Disconnect connector from CKP sensor while pushing lock button (4).