Grand Vitara 4WD V6-3.2L (2010)
Headlamp Igniter Module: Service and Repair
Igniter Removal and Installation
Igniter Removal and Installation
WARNING: Be sure to read Precautions for Discharge Headlight Service (If Equipped)carefully before working. Neglecting them may result
in personal injury.
Removal
1. Remove ballast.
2. Remove cover (1) from headlight housing by turning it counterclockwise.
3. Remove igniter (2) from discharge headlight bulb by turning it counterclockwise.
4. After disconnecting ground wire (1), pull out igniter (2) from headlight housing.