Grand Vitara 4WD V6-3.2L (2010)
6. Enable air bag system. Refer to Enabling Air Bag System:Advanced Air Bag.
7. Connect negative (-) cable at battery.
Except Advanced Airbag
Driver Air Bag (Inflator) Module Removal and Installation
WARNING: When handling an air bag (inflator) module, be sure to read Precautions on Handling and Storage of Air Bag System
Components:Except Advanced Air Bag and observe each instruction. Failure to follow them could cause a damage to the air bag (inflator)
module or result in personal injury.
Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system. Refer to Disabling Air Bag System:Except Advanced Air Bag.
3. Remove steering wheel side caps (2).
4. Loosen driver air bag (inflator) module mounting bolts (1) till it turns freely, pull them out and fix them to bolt clamps.
5. Remove air bag (inflator) module from steering wheel.
