Grand Vitara 4WD V6-3.2L (2010)
2. Install driver air bag (inflator) module (1) to steering wheel (2), taking care so that no part of wire harness is caught between them.
3. Make sure that clearance between module (1) and steering wheel (2) is uniform all the way.
4. Tighten left side bolt (3) of driver air bag (inflator) module first and then right side bolt (4).
Tightening torque
Driver air bag (inflator) module mounting bolt (a): 9 N.m (0.9 kg-m, 6.5 lbf-ft)
5. Install steering wheel side caps (5).