Grand Vitara 4WD V6-3.2L (2010)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature (ECT) Sensor Removal and Installation
Removal
1. Disconnect negative cable from battery.
2. Drain coolant.
3. Remove engine cover.
4. Remove oil level gauge and its guide.
5. Disconnect ECT sensor connector (1).
6. Remove ECT sensor from cylinder head.
Installation
Reverse removal procedure noting the following.
-
Tighten new ECT sensor to specified torque.
Tightening torque
ECT sensor (a): 22 N.m (2.2 kg-m, 16.5 lbf-ft)