suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Starter Motor > < Replacement of Remote Controller Battery|Page 4803
Page 3
background image

position. This operation indicates that remote controller ID code has been registered in keyless start control module.
If an additional remote controller needs to be registered, repeat the procedure of Step within 30 seconds after Step 5).

7. To end registration mode, remove ignition key from ignition key cylinder or turn it to ON position.

In case of vehicle equipped with immobilizer control system, if engine start function of keyless start system does not work after registration, check
ECM if DTC P1615 is detected. If it is detected, go to DTC P1615: Steering Lock Unit Communication Error (for Vehicle with Keyless Start
System). If it is not detected, perform registration procedure again.

Starter Motor > < Replacement of Remote Controller Battery|Page 4803