Grand Vitara 4WD V6-3.2L (2010)
P/S Pump Disassembly and Assembly
P/S Pump Disassembly and Assembly
Disassembly
1) Clean its exterior thoroughly.
2) With aluminum plates placed on vise first, grip pump body (15) with it.
3) Remove suction connector bolt, suction connector (1) and O-ring (2) from pump body (15).
4) Remove pressure switch (3) from pump body (15).
5) Remove plug (6), flow control spring (5) and flow control valve (relief valve) (4) from pump body (15).
6) Remove cover bolts, pump cover (7) and O-ring (2) from pump body (15).
7) Remove snap ring (11) from pump shaft (13).
8) Remove vanes (9) from rotor (10).
9) Remove cam ring (8), rotor (10), side plate (12) and O-rings (2) from pump body (15).
10) Pull out pulley (13) from pump body (15).
11) Remove oil seal (14) from pump body (15).
