Grand Vitara 4WD V6-3.2L (2010)
7) Install wheel and lower vehicle.
8) Tighten wheel nuts to specified torque. II:
9) Tighten suspension control arm nuts to specified torque with vehicle weight on suspension.
CAUTION:
It is the most desirable to have vehicle off hoist and in non-loaded condition when tightening them.
Tightening torque
Suspension control arm nut: 135 Nm (13.5 kg-m, 98.0 lbf-ft)
10) For headlight auto leveling model, after installation, initialize headlight auto leveling system.
Rod and Arm Components
Rod and Arm Components
