Grand Vitara 4WD V6-3.2L (2010)
CAUTION:
If reuse control rod outer bolt and nut, apply engine oil to thread, bearing and trunk surface.
e) The marks (5) on control rod washer (3) and rear suspension frame marked before its removal must be aligned and, tighten bolt and nut
temporarily by hand.
2) Tighten parking cable clamp bolt (1) to specified torque.
Tightening torque
Parking cable clamp bolt (M6) (a): 11 Nm (1.1 kg-m, 8.5 lbf-ft)