Grand Vitara 4WD V6-3.2L (2010)
2) Install rear suspension frame stopper (3) to rear suspension frame bushing (1) and press-fit upper mount stopper washer (2) by using press with
bearing installer.
CAUTION:
Be sure to use new upper mount stopper washer and rear suspension frame stopper.
NOTE:
Use bearing installer in dimensions of outer diameter 43.0 to 49.0 mm (1.69 to 1.92 in.), inner diameter 41.0 mm (1.61 in.) or more and length
21.0 mm (0.82 in.) or more.
Clearance "a" between washer and bushing "a": 1.5 mm (0.059 in.)
