Grand Vitara 4WD V6-3.2L (2010)
Front Strut Assembly Removal and Installation
Front Strut Assembly Removal and Installation
Reference: Front Strut Assembly Components
Removal
NOTE:
When servicing component parts of strut assembly, remove strut rod cap and then loosen strut nut a little before removing strut assembly. This will
make service work easier. Note that the nut must not be removed at this point.
1) Hoist vehicle, allowing front suspension to hang free.
2) Remove wheel and disconnect stabilizer joint (1) from strut bracket. When loosening joint nut, hold stud with hexagon wrench.