Grand Vitara 4WD V6-3.2L (2010)
Shifter A/T: Service and Repair
Manual Selector Assembly Removal and Installation
4-Speed Automatic Transmission
Manual Selector Assembly Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Remove front console box.
3) Disconnect shift lever switch connector.
4) Remove manual selector assembly mounting bolts.
5) Disconnect select cable (1) from manual selector assembly (2).
Installation
Reverse removal procedure to install manual selector assembly noting the following instructions.
^
Tighten manual selector assembly mounting bolts to specified torque.