Grand Vitara 4WD V6-3.2L (2010)
Installation
Reverse removal procedure for installation noting the following.
^
Use new drive plate bolt.
^
Tighten drive plate bolt as follows.
a. Tighten drive plate bolt to 30 Nm (3.1 kgf-m, 22.5 lbf-ft) in numerical order ("1" - "8") evenly and gradually.
b. In the same manner as Step a), retighten them to 45 degrees.
Tightening torque
Drive plate bolt * (a): 30 Nm --> +45 degrees (3.1 kgf-m --> +45 degrees, 22.5 lbf-ft --> +45 degrees)