Grand Vitara JLS Plus 2WD V6-2.5L (2000)
4. Remove three nuts and take out ABS hydraulic unit/control module assembly from bracket.
CAUTION:
^
Do not give an impact to hydraulic unit.
^
Use care not to allow dust to enter hydraulic unit.
^
Do not place hydraulic unit on its side or upside down. Handling it in inappropriate way will affect its original performance.
INSTALLATION
1. Install hydraulic unit by reversing removal procedure.
Tightening Torque
(a): 16 Nm (1.6 kg.m, 12.0 ft. lbs.)
(b): 21 Nm (2.1 kg.m, 15.5 ft. lbs.)
2. Bleed air from brake system.
3. Check each installed part for fluid leakage and perform hydraulic unit operation check.