Grand Vitara JLS Plus 2WD V6-2.5L (2000)
NOTE: Color ring on brake cable is for the purpose of identification. Use cable with the same colored ring as before removal.
2. Install brake cable spring and nipple end to parking brake shoe lever securely as shown in figure.
3. For brake shoe installation, refer to steps 1) and 4) of BRAKE SHOE INSTALLATION.
4. For brake drum installation, refer to steps 1) and 3) of BRAKE DRUM INSTALLATION.
5. For proper routing and secure clamping of parking brake cable.
6. For installation of cable to parking brake lever, refer to PARKING BRAKE LEVER INSTALLATION.
7. Upon completion of installation, adjust cable. Then check brake drum for dragging and brake system for proper performance. After removing
vehicle from hoist, brake test should be performed.
