Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Cruise Control Switch: Testing and Inspection
Coast/Set, Resume/Accel and Cancel Switches
These switches are built in the combination switch assembly.
CAUTION: Never disassemble combination switch assembly. Disassembly will spoil its original functions.
1. Disable air bag system.
2. Disconnect connector of COAST/SET, RESUME/ACCEL and CANCEL switches.
3. Check for resistance between "SW" and "GND" terminals of disconnected switch connector under each condition.
All switches released (OFF) : Infinity
CANCEL switch pressed (ON) : About 0 Ohms.
COAST/SET switch rotated (ON) : 200 - 240 Ohms.
RESUME/ACCEL switch rotated (ON) : 820 - 1000 Ohms.
If check result is not satisfactory, replace combination switch assembly.