Grand Vitara JLS Plus 2WD V6-2.5L (2000)
8. For 4WD vehicle, before disconnecting front propeller shaft, put match mark on joint flange and propeller shaft to facilitate their installation as
shown in figure.
9. For 4WD vehicle, disconnect propeller shaft from front differential.
10. Remove exhaust No.1 pipe.
11. Detach exhaust manifold stiffener from transmission case.
12. Remove exhaust manifolds and their gaskets from cylinder heads.
INSTALLATION
1. Install new manifold gaskets to cylinder heads and No.1 pipe gasket to exhaust No.1 pipe.
2. Install exhaust manifolds.
Tighten manifold nuts to specified torque.
Tightening Torque (a): 30 Nm (3.0 kg-m, 21.5 ft. lbs.)
3. Attach exhaust manifold stiffener to transmission.
