Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Control Assembly: Testing and Inspection
HEATER MODE CONTROL SWITCH INSPECTION
Mode Control Switch
-
Check if continuity exists between each pair of terminals listed when mode control button is pressed.
-
With battery voltage (+) connected to terminal "I" and (-) to terminal "F", press each mode control button and check if indicator lamp lights.
-
With battery voltage (+) connected to terminal "A" and (-) to terminal "H", check if illumination lamp lights.
A/C Switch (if equipped)
-
Press A/C button and check if there is continuity between terminals "D" and "G".
-
With battery voltage (+) connected to terminal "K" and (-) to terminal "D", press A/C button and check if indicator lamp lights.
