Grand Vitara JLS Plus 2WD V6-2.5L (2000)
6. With coupler disconnected, blow into hose "A". Air should not come out of hose "B".
If not, replace EVAP canister purge valve.
7. Connect 12 V-battery to solenoid purge valve terminals.
In this state, blow hose "A".
Air should come out of hose "B".
WARNING: Do not suck the air through valve. Fuel vapor inside valve is harmful.
If check result is as specified, check EVAP canister purge valve harness.
If not, replace EVAP canister purge valve.
8. Connect vacuum hoses.
9. Connect EVAP canister purge valve coupler securely.