Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Continuing to your left. Install the last Vacuum Hose Mounting Clamp (3) with the other existing bolt on the surge tank.
Insert Vacuum Tee 3-way (6) and Vacuum Hose (5) into end of Vacuum Hose (4) as shown. Cut and remove 5cm off of tank pressure control
solenoid vacuum hose and connect new Vacuum Hose (5) with tee assembly to nipple. Then attach remaining vacuum hose from tank pressure
control solenoid to Tee (6).
