Grand Vitara JLS Plus 2WD V6-2.5L (2000)
6. Place drive end frame on pulley, and then install rotor to drive end frame.
7. Install rear end frame to drive end frame.
8. Tighten 4 nuts to specified torque.
Tightening Torque
(a): 4.5 N.m (0.45 kg.m, 3.5 lb.ft)
9. Install pulley and tighten pulley nut with holding shaft by using hexagonal box wrench to specified torque.
Tightening Torque
(a): 111 N.m (11.1 kg.m, 80.5 lb.ft)
10. Install 4 rubber insulators.