Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
SHOCK ABSORBER
The shock absorber is non-adjustable, non-refillable, and cannot be disassembled. The only service the shock absorber requires is replacement when it
has lost its resistance, is damaged, or leaking fluid.
REMOVAL
1. Hoist vehicle and remove rear wheel.
2. Support rear axle housing by using floor jack to prevent it from lowering.
3. Remove lock nut (H25 vehicle) and absorber nut.
4. Remove lower mounting bolt.
5. Remove shock absorber
INSTALLATION
1. Install shock absorber. Refer to figure for proper installing direction of lower mounting bolt.
2. Remove floor jack.
3. Lower hoist.