Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Extension Housing: Service and Repair
DISASSEMBLY
1. Remove oil seal.
2. Remove select return spring bolts and then springs and guide pins.
3. Remove speed sensor assembly.
REASSEMBLY
1. Install oil seal.
2. After applying grease, install select guide pins, select return springs and spring bolts and torque them to specification.
"A": Grease 99000-25010
Tightening Torque
(a): 23 Nm (2.3 kg.m, 17.0 ft. lbs.)
After installing, check to make sure that each pin moves smoothly.
3. Install speedometer driven gear case assembly to extension case.
