suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Front Wiper and Washer Switch (In Combination Switch)|Page 7178 > < Wiper Relay|Testing and Inspection|Page 7172
Page 1
background image

Wiper Switch: Testing and Inspection
Front Wiper and Washer Switch (In Combination Switch)

Front Wiper and Washer Switch (in Combination Switch)

1. Disconnect negative cable at battery.
2. Disconnect combination switch lead wire coupler.
3. Use a circuit tester to check the continuity at each switch position. If any continuity is not obtained, replace switch.

Front Wiper and Washer Switch (In Combination Switch)|Page 7178 > < Wiper Relay|Testing and Inspection|Page 7172