Grand Vitara LTD 2WD V6-2.5L (2001)
Seats: Service and Repair
Front Seat
Front Seat Removal And Installation
Front Seat Components
Removal
1. Disconnect lead wire(s) at coupler (if equipped).
2. Remove four mounting bolts fixing front seat to seat rail to remove front seat.
3. Disassemble and repair seat as necessary.
Installation
Reverse removal procedure to install front seat, noting the following points.
-
Torque to specifications as shown in the figure.
Tightening torque
Front seat mounting bolt (a): 35 N.m (3.5 kg-m, 25.5 lbf-ft)
