Grand Vitara LTD 2WD V6-2.5L (2001)
4. To confirm that boot is fitted in its groove in cylinder properly, pull piston out of cylinder a little but do not take it all out.
5. Insert piston into cylinder by hand.
6. For H25 engine model, install anti noise shim, if equipped.
Caliper
Before installing caliper (cylinder body) to carrier, check to ensure that guide pin (pin bolt) inserted in each caliper carrier hole can be moved
smoothly in thrust direction
NOTE: Where temperature gets as low as -30°C in cold weather, use rubber grease whose viscosity varies very little even at -40°C (-40°F).
