Grand Vitara LTD 2WD V6-2.5L (2001)
Load Compensator: Service and Repair
REMOVAL
1. Clean around reservoir cap and take out fluid with syringe or such.
2. Hoist vehicle.
3. Disconnect brake pipes (2) from LSPV (1).
4. Remove LSPV assembly (1) with spring (2) from vehicle body.
5. Remove spring (2) from lever (5).
CAUTION: LSPV assembly (1) must not be disassembled. Replace with new one if defective.
INSTALLATION
CAUTION: LSPV assembly must not be disassembled. Replace with new one if defective.
Install by reversing removal procedure, noting the followings.