Grand Vitara LTD 2WD V6-2.5L (2001)
Cruise Control Servo Cable: Service and Repair
Cruise Cable
REMOVAL
1. Disconnect cruise cable from cruise control arm and accelerator bracket.
2. Remove actuator cap and disconnect cruise cable from actuator.
3. Release cable from all clamps.
4. Remove cable from vehicle.
INSTALLATION
Install cruise cable by reversing removal procedure, noting the following points.
-
Refer to the figure for proper clamp location and cable routing.
-
Adjust cable play to specification referring to "CRUISE CABLE PLAY INSPECTION AND ADJUSTMENT".
