Grand Vitara LTD 2WD V6-2.5L (2001)
7. Apply sealant "A" to lower oil pan sealing surface area as shown in the figure.
"A": Sealant 99000-31150
8. Install lower oil pan to upper oil pan.
Tightening torque
Oil pan bolt (to upper oil pan) (e): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
9. Install gasket (1) and drain plug (2) to oil pan.
Tightening torque
Engine oil drain plug (f): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
10. Attach radiator outlet pipe to upper oil pan.
11. Install front differential housing according to installation procedure.
12. Install rack and pinion assembly.
13. Refill front differential housing with gear oil if drained.
14. Install oil level gauge guide with new O-ring.
15. Refill engine with engine oil.
16. Check wheel alignment.