Grand Vitara LTD 2WD V6-2.5L (2001)
Intake Manifold: Service and Repair
REMOVAL
1. Release fuel pressure in fuel feed line.
CAUTION: This work must not be done when engine is hot. If done so, it may cause adverse effect to catalyst.
2. Disconnect negative (-) cable at battery.
3. Drain coolant.
WARNING: To help avoid danger of being burned, do not remove drain plug and radiator cap while engine and radiator are still hot.
Scalding fluid and steam can be blown out under pressure if plug and cap are taken off too soon.
4. Remove strut tower bar.
5. Disconnect coupler from intake air temp. sensor.
