Grand Vitara LTD 2WD V6-2.5L (2001)
14. Connect brake booster hose (2) to intake manifold.
15. Connect injector wire (1) coupler.
16. Connect water hoses (3) to throttle body.
17. Connect accelerator cable (1) and A/T throttle cable (2) (for A/T vehicle) to throttle body.
18. Install surge tank pipe (2) to intake manifold with new gaskets and intake air pipe (1) to throttle body.
19. Install surge tank cover (1).
20. Install air cleaner upper case.
21. Connect coupler to intake air temp. sensor.
22. Install strut tower bar (1).
23. Check to ensure that all removed parts are back in place. Reinstall any necessary parts, which have not been reinstalled.
24. Refill cooling system.
25. Connect negative cable at battery.
26. Upon completion of installation, verify that there is no fuel leakage at each connection according to procedure.
