Grand Vitara LTD 2WD V6-2.5L (2001)
Timing Chain: Service and Repair
LH (No.1) Bank 2nd Timing Chain and Chain Tensioner
REMOVAL
1. Disconnect negative (-) cable at battery.
2. Drain engine oil.
3. Drain coolant.
4. Remove timing chain cover.
5. Turn crankshaft to meet the following condition.
^
Key (1) on crankshaft positions as shown in the figure.
^
Arrow mark on idler sprocket No. 2 (2) points the center of crankshaft.
^
The marks on sprockets (3) match with marks on cylinder head.
6. Note that this step must be followed for reinstallation of timing chain.
