Grand Vitara LTD 2WD V6-2.5L (2001)
6. Install sprockets to intake and exhaust camshafts by aligning silver plate of LH bank 2nd timing chain, match marks on intake sprocket and exhaust
sprocket respectively.
CAUTION: Do not turn camshaft more than necessary. If turned excessively, valve and piston may get damaged.
7. Install LH bank intake and exhaust camshaft timing sprockets.
To install it, fit a spanner to hexagonal part at the center of camshaft to hold stationary.
Tightening torque
Camshaft timing sprocket bolt (b): 80 Nm (8.0 kg-m, 57.5 ft. lbs.)
8. With latch of tensioner adjuster No. 3 returned and plunger pushed back into body, insert stopper (pin) into set hole. After inserting it, check to
make sure that plunger will not come out.