Grand Vitara LTD 2WD V6-2.5L (2001)
9. Install timing chain tensioner adjuster No. 3 (1).
Tightening torque
Timing chain tensioner adjuster No. 3 bolt (c): 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
Timing chain tensioner adjuster No. 3 bolt (d): 45 Nm (4.5 kg-m, 32.5 ft. lbs.)
Tightening order: "1 " - "2" - "3"
10. Pull out stopper (pin) from set hole.
11. Turn crankshaft 2 rotations clockwise then align timing mark on crankshaft and timing mark on cylinder block as shown in the figure. Check each
other timing marks that align them shown in the figure.