Grand Vitara LTD 2WD V6-2.5L (2001)
1. Install new O-rings (3) to water pump (1).
2. Install water pump to cylinder block.
Tightening torque
Water pump bolt (H25 engine) (a): 27 Nm (2.7 kg-m, 19.5 ft. lbs.)
3. Install timing chain cover.
4. Install oil pan, front differential housing, P/S system, cooling system, intake manifold with throttle body and other parts.
5. Refill cooling system with coolant, front differential with gear oil, P/S system with specified fluid and engine with engine oil
6. Check wheel alignment.
7. Verify that there is no fuel leakage, water leakage and oil leakage at each connection.
8. Connect negative (-) cable at battery.