suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Headlight Switch (In Combination Switch)|Page 4533 > < Diagram Information and Instructions|Page 4527
Page 1
background image

Combination Switch: Testing and Inspection
Headlight Switch (In Combination Switch)

1. Disconnect negative (-) cable at battery.
2. Disconnect combination switch lead wire couplers.
3. Use a circuit tester to check the continuity at each switch position. If any continuity is not obtained, replace switch.

Headlight Switch (In Combination Switch)|Page 4533 > < Diagram Information and Instructions|Page 4527