Kizashi AWD L4-2.4L (2010)
12) Remove front stabilizer bar and steering gear case from front suspension frame.
^
Stabilizer bar
^
Steering gear case
Installation
1) Install front stabilizer bar and steering gear case to front suspension frame.
^
Front stabilizer bar
^
Steering gear case
2) Install front suspension frame to vehicle body and tighten front suspension frame No. 1 and No. 2 bolts, front suspension frame mounting bracket
bolts and front suspension mounting bracket nuts in this sequence to specified torques.
Tightening torque
Front suspension frame mounting bracket bolt (a): 90 Nm (9.2 kg-m, 66.5 lbf-ft)
Front suspension frame No. 1 bolt (b): 120 Nm (12.2 kg-m, 88.5 lbf-ft)
Front suspension frame No. 2 bolt (c): 120 Nm (12.2 kg-m, 88.5 lbf-ft)
Front suspension mounting nut (d): 55 Nm (5.6 kg-m, 40.5 lbf-ft)
